The new generation Hybrid tweeter offers unrivaled high-frequency performance in a compact design with incredible high power handling capabilities at very low distortion levels. Known as the MT300, its design uses Morel’s signature Acuflex hand-coated coated 28mm soft dome, Hexatech aluminum voice coil, and dual neodymium motor technologies. While its size allows it to be fit in most factory locations, surface and flush mount options with a beautiful lotus grille provide an elegant look fitting for modern vehicles.
HANDCRAFTED ACUFLEX SOFT DOME - A specially engineered damping compound applied to the soft domes of specific Morel tweeters and midranges. The combination of these materials creates a diaphragm that exhibits controlled canceling break-up (accurate–flexing), meaning each break-up mode is counteracted by another in the opposite direction. This cancellation of break-up modes leaves nothing but the pure, natural sound Morel tweeters and midrange are famous for.
HEXATECH™ ALUMINIUM VOICE COIL - Made from 100% aluminum wire shaped like a honeycomb, the Hexatech™ voice coil reduces air gaps in the coil windings, thereby increasing efficiency by up to 20%. Being lightweight, Hexatech™ voice coils are largely responsible for the extraordinary fast transient response Morel drive units are known for.
NEODYMIUM MAGNET - The most powerful magnet available, neodymium enables Morel to create physically compact speakers, such as tweeters and midrange, that fit in very limited spaces without limiting the quality of sound.
| Nominal Impedance (ohm) | 6 |
| Power Handling Wrms | 130 |
| Max. Trans. Pwr Handling Wrms (10ms) | 350 |
| Sensitivity (2.83 V/1M) dB | 93 |
| Frequency Response Hz | 1600-25000 |
| FS Hz | 1000 |
| Voice Coil Diameter mm (inch) | 28 (1.25) |
| Voice Coil Former | Aluminum |
| Voice Coil Wire | Hexatech™ aluminum |
| DC Resistance ohm | 5.2 |
| Magnet System | Double Magnet Neodymium |
| Dome Type | Acuflex™ hand-coated soft dome |
| Dome Material | Silk |
| Unit Diameter mm (inch) | 43.00 (1.69) |
| Mounting Dept mm (inch) | 13.20 (0.52) |
| Mounting Cutout mm (inch) | 47.00 (2.00) |
| Net Weight Kg (lb) | 0.067 (0.134) |
This item can be back-ordered.