The new generation MT-120 tweeter offers unrivaled high-frequency performance in a compact design with incredible high power handling capabilities at very low distortion levels. While its size allows it to be fit in most factory locations, surface and flush mount options with a beautiful lotus grille provide an elegant look fitting for modern vehicles.
DMM MOTOR - Morel’s double drive system generates more magnetic energy than a single magnet of similar size, increasing efficiency, and the dynamic range. The position of the secondary magnet fixed above the top plate in the motor is the key in controlling stray magnetic flux, thus generating a more focussed magnetic field while also contributing to the “shielded” characteristic of our speakers.
HANDCRAFTED ACUFLEX SOFT DOME - A specially engineered damping compound applied to the soft domes of specific Morel tweeters and midranges. The combination of these materials creates a diaphragm that exhibits controlled canceling break-up (accurate–flexing), meaning each break-up mode is counteracted by another in the opposite direction. This cancellation of break-up modes leaves nothing but the pure, natural sound Morel tweeters and midrange are famous for.
HEXATECH™ ALUMINIUM VOICE COIL - Made from 100% aluminum wire shaped like a honeycomb, the Hexatech™ voice coil reduces air gaps in the coil windings, thereby increasing efficiency by up to 20%. Being lightweight, Hexatech™ voice coils are largely responsible for the extraordinary fast transient response Morel drive units are known for.
| Nominal Impedance (ohm) | 5 |
| Power Handling Wrms | 80 |
| Max. Trans. Pwr Handling Wrms (10ms) | 250 |
| Sensitivity (2.83 V/1M) dB | 90 |
| Frequency Response Hz | 1800-22000 |
| FS Hz | 1200 |
| Voice Coil Diameter mm (inch) | 28 (1.125) |
| Voice Coil Former | Aluminum |
| Voice Coil Wire | Copper |
| DC Resistance ohm | 5.2 |
| Magnet System | Neodymium |
| Dome Type | Acuflex™ hand coated soft dome |
| Dome Material | Silk |
| Unit Diameter mm (inch) | 43 (1.69) |
| Mounting Depth mm (inch) | 13.20 (0.52) |
| Mounting Cutout mm (inch) | 47 (2.00) |
| Net Weight Kg (lb) | 0.07(0.15) |
This item can be back-ordered.